​​

Powder Puff Rules

​​

 

A 12“ x 12“ roof sign is mandatory.

 

CAGE

1. You may have a 4 point floating cage, You may have a up and over bar but must be straight up and down.

2. Rear seat bar has to be within 8 inch from the back of the seat.

3. Down legs may attach to floor; gas tank protector must be 4" off of package tray.

4. You may weld 6"x6" plate on the door post for mounting the cage.

5. Cage material can be 6"x6" or smaller.

6. All cage components except for down legs must be 4 inch off the floor.

7. You may add a bar in the drivers door at an angle and wire it to the door post. Drivers door only.

8. Battery may be relocated inside car, must be securely mounted to cage or body. 

 

Roll over bar highly preferred

 

PASSENGERS ALLOWED ONLY WITH CAGE!!!

 

 

Stock bumpers or Late 90's and newer crown vic etc bumpers are allowed NO STUFFING OR LOADING BUMPERS, NO POINTY BUMPERS 

 

PRE RAN CARS ONLY - Any patching or rust repair will only be allowed if preapproved in a text with pictures.

 

The hood can be held down in 6 places with 9 gauge wire 3 loops max, sheet metal to sheet metal only. Hoods must be open for inspection. Hoods must have a 12"x12" (Min.) hole cut in center.

 

You may leave the stock gas tank in the stock location if it is in front of the rear axle, or you may replace the gas tank with a metal boat tank or aftermarket fuel cell. No stock gas tanks inside of the vehicle are allowed

 

Skid steer, V Tread, Donuts, Stock tires allowed. NO FOAM FILLED

 

NO FRAME OR BODY WELDING except to attach bumpers or weld doors shut; max door weld 5 on 5 off except driver door which may be welded solid.